Precisely manufactured to your requirements
All bollards are manufactured from high grade Radiata Pine with rough sawn or machine gauged finish, uni-diameter and square options.
Choose from our in stock styles or we can manufacture to your custom design.
BOLLARDS LENGTHS
Below are the standard lengths we offer, we can also produce to any custom specifications required. The most popular length is 1200mm, followed by 900mm and 1500mm. There is no set in-ground depth for bollards; we recommend setting 1/3 to 1/2 of the bollard in the ground.
900mm
1200mm
1500mm
SQUARE BOLLARD SIZES
We have a good range of sizes available below. Our 150mm x 150mm size with a machine gauged finish is the most widely used for bollards.
125mm x 125mm
(MG & RS)
150mm x 150mm
(MG & RS)
200mm x 200mm
(RS only)
250mm x 250mm
(RS only)
300mm x 300mm
(RS only)
SQUARE BOLLARD SPECIFICATIONS
There are endless options for the look and finish of timber bollards. Below are our standard top profile and detail finish options that we can produce. Holes for rope or chain can also be added to any of our bollard variations. We can custom-make nearly any bollard, although there are setup fees for variations from our standard specifications shown below.
We recommend using one of our in-stock styles. Custom styles can take weeks to fit into our production schedule, causing unwanted delays for initial orders or replacements, which can become costly.
Chamfer Top
Chamfer Top, Arris Side Edge
Chamfer Top, Collar
Chamfer Top, Collar, Arris Side Edge
Flat Top
Flat Top, Collar
Slant Top
Slant Top, Collar
Pointed Top
Pointed Top, Arris Side Edge
Pointed Top, Collar
Pointed Top, Collar, Arris Side Edge
ROUND BOLLARD SIZES
We have a good range of sizes available below. Our 150mm x 150mm size with a machine gauged finish is the most widely used for bollards.
150mm Diameter
180mm Diameter
200mm Diameter
ROUND BOLLARD SPECIFICATIONS
Shown below are the styles and specifications that can be ordered. Slant and bullnose tops can also be manufactured. Holes for rope or chain can be added to any of the available styles. We only hold stock in the standard 150mm diameter x 1.2m dome top bollard, all other styles are made to order.
Dome Top
Dome Top, Collar
Dome Top, 2 Collars
Flat Top
Flat Top, Collar
Flat Top, 2 Collars
Chamfer Top
Chamfer Top, Collar
Chamfer Top, 2 Collars
BOLLARD ACCESSORIES
CONCRETE SURROUNDS
We offer pre-cast mowing concrete surrounds for our bollards. These are available in 125mm and 150mm for square bollards, and 150mm and 180 / 200mm for round bollards.
REMOVABLE SLEEVES
Need vehicle access to an area sectioned off with bollards? Our removable sleeves are the perfect solution. Available for 150mm bollards in both round and square, simply concrete in the sleeve, attach the supplied hasp to the bollard, fit it through the slot in the lid, and secure it with a padlock.
